|
|
Alert:
The VBox-X is specifically manufactured for
the North American market, with power input of 110V AC.
Please do not attempt to use or plug into 220-240V AC power
outlets.
Warranty does not cover products returned to us for this
problem. |
Controlled via any DiSEqC1.2 Receiver or
Supplied Remote Control
The Powermax VBox-X (VBox 10) is the latest
actuator
positioner & controller on the market. Released June 2010, it uses
the latest software to accurately translate and convert DiSEqC1.2
commands from your satellite receiver to 36V power to drive your
actuator arm in or out (East/West). Use it with any DiSEqC1.2
satellite receiver and automatically drive the actuator arm to the
specific location of the satellite without having to use the remote
control supplied by the positioner controller. Your receiver is
not DiSEqC enabled? That's OK. Simply use the remote control
supplied with the VBox-X to drive the actuator east or west. Use
it with any satellite receiver, or as a stand alone controller.
The unit comes with a full 1-year warranty honored directly by WS
International.
Features:
-
Compatible
with any satellite receiver, including FTA receivers or 4DTV
receivers
-
Compatible
with any
Actuator & H-H motor
-
3 Digit
LED Display
-
Drive Dish
up to 3M(Optional:5M)
-
99
Satellite Positions
-
Fine-tune
West & East Buttons
-
Professional Remote Control
-
Overload
Protection (Auto-recovery)
-
Anti-Noise
Design
|
Technical Specifications |
|
Power Input |
110V
AC /50Hz |
|
Power Output |
36 VDC |
|
Max Dish Size |
3.04m / 10-foot |
|
Max
Output Current |
305A/4.2A |
|
Max
Power Consumption |
80w/100w |
|
Protocol |
DiSEqC 1.0/2.0 |
|
Positions Memories |
99 |
|
Operation
by: |
Either DiSEqC1.2
Receiver or Supplied Remote Control Unit |
|
Display |
3
Digit LED |
|
Resynchronize Function |
YES |
|
Manual Buttons |
Power, East, West |
|
Protection |
Software Limit Protection & Overload Protection |
|
