-CDVB2000E

-CDVB2000D

-Finepass 5800

-DBS2800
-CDVB2000M
-CDVB5110G

-DBS2550
-DBS2500
-DBS4500
-DBS4550

-DSB4700

-Tracker II+

-Tracker NA+

-Tracker 0.3dB
-Tracker NA 0.3dB

-BSC621-2 C/Ku LNBF

-BSC322-2 Ku

-Xtreme
-XtremeII
-Dual Ku LNBF
-SNF031
-SNH031
-QDF031
-QPH031
-TWF031
-TWH031

-V-Box
-BSC621-2 C/Ku LNBF
-C band LNB
-C band LNBF

-WS7630
-DS2076

-FSS LNBF Bracket
-DSS LNBF Bracket

-SG2100 Motor

-DM910 Motor

-SG-6000 DiSEqC Dish Motor

-FSS LNBF Bracket
-DSS LNBF Bracket

-RS232 Cables NM

-RS232 Cable Serial

-4X1 DiSEqC Switch

-2X1 DiSEqC Switch

-3X4 Multi-Switch

-Diplexers

-Installation Tools

-Self Install Kit

-Installation Supplies

-SF100 Meter

-SF95

-Trimax SM-1100

-Trimax SM-2200

-AF1 Site Survey Tool

Replaced by TechSAT TRACKER

Most people know how important LNB noise figure is as a measure of LNB performance. However other parameters are also important contributors to overall signal quality.

Exact Feed Design. Designed with the latest 3D modeling software to ensure maximum energy transfer from the

dish to the LNB electronics. A precise and optimum Horn and Feed design will not effect the

overall quoted noise figure, but will give a significant improvement in overall performance.

Superior Phase Noise. Compare WS Internationals specification to other manufacturers. It is typically 10dB

better. The cleaner the oscillator the higher the performance.

Excellent Isolation. In the center of the satellite footprint, all transponders are typically the same

strength. However, at the edges, there can be wide variations. To receive the

weaker signals, multiple output LNBs require excellent isolation.

Compare WS International's isolation performance with other manufacturers’ LNBs.

Positive Gain Slope. To compensate for long cable runs, and helps prevent loss of

channels due to 2nd harmonic distortion in the receiver.

Tested for Ultimate Reliability. All WS International brand products are electrically and pressure

tested twice, at various stages of the assembly.

A sample of finished units are further tested at hot

and cold temperature to ensure utmost reliability.